XC6227
The XC6227 series is a highly accurate, low noise, high ripple rejection, low dropout, and low power consumption high speed voltage regulator. ,The series consists of a voltage reference, an error amplifier, a driver transistor, a current limiter, a thermal protection circuit, a reverse current protection circuit and a phase compensation circuit.
The CE function enables the entire circuit to be placed in a stand-by state by inputting a low level signal to the CE pin. Over-current protection and thermal protection circuits are integrated. The protection circuit starts to operate when either output current reaches the current limit level or junction temperature reaches the temperature limit. With the reverse current protection function of a driver transistor, the reverse current flow is prohibited when VOUT voltage is higher than VIN voltage. For an example, when a battery is connected to the VOUT pin, battery current will not flow back to the XC6227.
特點
最大輸出電流 |
700mA |
輸入輸出電壓差 |
120mV @IOUT=300mA(VOUT=3.0V) |
輸入電壓范圍 |
1.7V〜6.0V |
輸出電壓選擇 |
0.8V〜5.0V |
高精度 |
±1% (VOUT>2.0V) ±0.02V (VOUT≦2.0V) |
低功耗 |
100μA |
Chip Enable(CE) |
Active High, Standby Current below 0.1μA |
電源抑制比 |
65dB @1kHz |
工作環境溫度 |
-40℃〜85℃ |
低ESR電容 |
可用陶瓷電容 |
封裝 |
USP-6C, SOT-25, SOT-89-5 |
Environmentally Friendly |
EU RoHS Compliant, Pb Free |