品牌索引
產品分類 > 小信號開關二極管> 瞬態電壓抑制器TVS/ESD> 雙極管二極管> 調諧二極管> 齊納(穩壓)二極管> 小信號肖特基二極管> 頻帶轉換二極管> 中/高功率管> 射頻PIN二極管> Sinterglass二極管> 整流器 > 可編程單結晶體管 (PUT)> SIDAC> 可控硅整流管 (SC) > 晶閘管浪涌保護器件 (TSPD)> 三端雙向可控硅開關元件 (TRIAC)> 半導體閘流管> 快速分立式> 相控分立式 > N溝道(N-Channel)> P溝道(P-Channel)> 雙N溝道(Dual N-Channel)> 雙P溝道(Dual P-Channel)> 雙N和P溝道(Dual N and P-Channel)
|
產品介紹
說明
This 4-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB. When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver. The TXB0104 is designed so that the OE input circuit is supplied by VCCA. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. 特性
|
