品牌索引 產品分類 > 小信號開關二極管> 瞬態電壓抑制器TVS/ESD> 雙極管二極管> 調諧二極管> 齊納(穩壓)二極管> 小信號肖特基二極管> 頻帶轉換二極管> 中/高功率管> 射頻PIN二極管> Sinterglass二極管> 整流器 > N溝道(N-Channel)> P溝道(P-Channel)> 雙N溝道(Dual N-Channel)> 雙P溝道(Dual P-Channel)> 雙N和P溝道(Dual N and P-Channel)
|
產品介紹
說明
The SN74CB3T3245 is a high-speed TTL-compatible FET bus switch with low ON-state resistance (ron), allowing for minimal propagation delay. The device fully supports mixed-mode signal operation on all data I/O ports by providing voltage translation that tracks VCC. The SN74CB3T3245 supports systems using 5-V TTL, 3.3-V LVTTL, and 2.5-V CMOS switching standards, as well as user-defined switching levels (see Figure 1). The SN74CB3T3245 is an 8-bit bus switch with a single ouput-enable (OE)\ input and a standard ’245 pinout. When OE\ is low, the 8-bit bus switch is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE\ is high, the 8-bit bus switch is OFF, and a high-impedance state exists between the A and B ports. This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. 特性
|